Cabinetmaker. Installer. Interiors, kitchens, residential, commercial, variety of work. Work in teams of 4. Experience required. West Auckland. Travel allowance. PERM Job. Start ASAP.

CABINETMAKER / INSTALLER

 Established Cabinetmaking company in West Auckland making and installing quality interiors, kitchens and cabinetry for both residential and semi commercial, require another full time permanent Cabinetmaker Installer for a start work as soon as possible.

Experience should include but not limited to:

  • Cabinetmaking & Installing experience is essential
  • Interiors, kitchens, residential, semi commercial, schools, apartments
  • Able to follow drawing
  • Work in team of 4
  • Must be able to use dimension saw, thicknesser, hand tools & prefer some experience with spindle moulders.
  • Ensure that company Health & Safety procedures are followed at all times.

 Job details:

Type:        Full time permanent position

Wage:       $30/hr neg with experience PLUS $ allowances, travel perks

Misc:         Overtime available

Based:      West Auckland, Auckland

Start:         ASAP

 Eligibility to be able to work in NZ are very important, please note this in CV.

 CONTACT:

Patricia Mawhinney 

Appointments Recruitment Specialists

Mobile             021 500 653 or (09) 478 9954 

 Email               info@appts.co.nz

 Free Ph            0800 030 125 

 Website           www.appts.co.nz

If you have contacted Appointments Recruitment Specialists before, you are welcome to do so once again, and we would be pleased to hear from you.

 

INSTALLER. Refrigeration. HVAC. Commercial / Industrial. Permanent Full Time. Hawkes Bay area. Good wage package neg with skills, knowledge & experience. Company Vehicle, mobile, callout / tool allowances. Start ASAP.

HVAC Installer with sound related experience in HVAC Installations, commercial / industrial is required by a Hawkes Bay HVAC locally owned business with a good reputation for high quality installation and service work in HVAC Refrigeration systems over the last 10 years of operation.

To complement our installation team, we’re seeking skilled and experienced HVAC Installer tradesperson who is comfortable working as part of a team or autonomously installing a broad range of HVAC systems.

 

You should be comfortable in interpreting plans, site measurement, purchasing of materials and instruction of junior staff / apprentices. In support of you there will be assistance & guidance from the installation team supervisor and engineering manager as well as the technical skills of the service team to call upon. It is essential that you possess problem solving skills and be able to see tasks through to conclusion fully.

As a team we set high standards of workmanship and would expect any candidate to be of similar mind.

We offer the following in return:-

  • Interesting and varied work
  • Competitive remuneration
  • Company Vehicle
  • Smart Phone
  • Tool Allowance
  • Health and Safety Training
  • Ongoing Trade Training
  • A friendly, enjoyable and safe working environment
  • An environment where everyone’s contribution is valued and acknowledged
  • Relocation assistance for those outside of the Hawkes Bay region

 COMPETENCIES / PERSONAL ATTRIBUTES

    • A self-starter with good initiative who can work within a team environment
    • Previous HVAC Installation experience
    • Maintain good working relationships, undertaking positive customer service
    • Current Full Manual NZ Drivers Licence

 

 

 Please Note

Preference will be given to applicants eligible to work in New Zealand and already in New Zealand.

 

JOB DETAILS:

Wage rate:     Negotiable, market related to skills & experience

Location:        Hawkes Bay Area

Times:             Monday to Friday 8 am – 4.30 pm (40 hours flexible)

Overtime:       Overtime paid time 1½

Misc:               Company Vehicle & Mobile phone supplied

Allowances:   Callout & Tool allowances (Basic tools required)

Start:               ASAP

 

 Note:               Your CV must REFLECT your detailed working experience covering the key points of description above, including reasons for leaving current / previous jobs

 

CONTACT:

Dennis Mawhinney  

Appointments Recruitment Specialists

Email                          dennis@appts.co.nz
Free Ph                       0800 030 125 (from all phones within NZ)
Mobile                         021 888 500   or   (09) 478 9954
Website                      www.appts.co.nz

 

Important Additional Requirements to Note:

  1. A brief Cover Letter outlining your past work experience, your current work situation and all experience you have relating to the above Job Description is included in cover letter too.

  2. Your CV must be included & detailed with all your work experience to date.

  3. BOTH your Cover Letter & CV to please be in Word Format (preferred).

 

CNC Press Brake Setter Op – Night Shift OR Day shift options, flexible. Experience needed. $25 to $30/hr neg. 40 hr wk. East Tamaki, Auckland.

A steel manufacturing company located in East Tamaki, Auckland have 2 SHIFT work positions available for experienced CNC Press Brake Setter Operators.

 1st Shift option – DAY Shift

working 3 days a week, Friday, Saturday, Sunday, 6 am to 6 pm, 12 hour shifts working 36 hours & paid for 40 hours per week.

 2nd Shift option – NIGHT Shift

working 4 days a week Monday, Tuesday, Wednesday, Thursday, 4.30 pm to 2.45 am, working & paid for 40 hours per week.

Summary of job – CNC Press Brake Machine Setting / Operating / Folding with some basic programming, ensuring all details are accurately obtained & clearly understood.

Main Responsibilities – Production

  • Setting and Operating CNC Press Brakes
  • Previous CNC Press Brake machining experience is very important
  • Folding of various types of sheetmetal such as Mild & Stainless Steel
  • Most programs are downloaded but you should be able to do some basic programming using the control panel
  • Capable of reading & working with Engineering Drawings
  • There is some heavy lifting, only 20% of the time and there is assistance plus machinery to lift heavy loads
  • Good communication ability is required

Required Attributes

Applicants should already be situated in New Zealand & eligible to work in New Zealand & have the right skills and experience required for these CNC Press Brake Operators positions.

Job Details:

 Type:                          Permanent Fulltime Positions

Wage:                         $25 – $30/hr neg skills & experience

Location:                    East Tamaki, NZ

Work Hours:           DAY Shift working 3 days a week, Friday, Saturday, Sunday,
6 am to 6 pm, 12 hour shifts working 36 hours & paid for 40 hours per week.

OR

Work Hours:              NIGHT Shift working 4 days a week Monday, Tuesday, Wednesday,
Thursday, 4.30 pm to 2.45 am, working & paid for 40 hours per week.

 

CONTACT:

Dennis Mawhinney

Appointments Recruitment Specialists

Free Ph           0800 030 125 (even from cell phones with no credit within NZ)

Mobile             021 888 500   or   (09) 478 9954

Email              dennis@appts.co.nz

Important Additional Requirements to Note:

  1. Your CV must be included & detailed with your relevant work experience to date.
  2. A brief Cover Letter outlining your past work experience, your current work situation and
    all experience you have relating to the above Job Description is included in cover letter too.
  3. Please put your name and trade in the subject line of your email, as I receive many applications a day and this will help me find your application a lot easier.
  1. Note your eligibility to work in NZ, is very important and a requirement.
  2. If you have contacted Appointments Recruitment Specialists before, you are welcome to do
    so once again and we would be pleased to hear from you.

 

 

CAB Shop Manager. Liaise with Programming Manager, Commercial Site, Installation, Project Managers.
Linc into Detailing. Smart Sheet / Gantt. East Tamaki $105K pa neg.

Purpose

To Manage all aspects of project and CAB Shop work to ensure each department, process and sales order is completed on-time in spec and on budget. This will ensure that the company covers all business performance and people development is seen as best in NZ.

The company have a Project Management team who project manager the overall project.

This CAB Shop Manager roll co-ordinates and manages the internal department CAD, Purchasing, Machining, dispatching and reporting on timelines.

Key points

Experienced bespoke cabinetmaker, understanding of drawings, assembly, work flow.

Man management.

Coordinating project manager item dates, assembly lead times, using Smart Sheet / Gantt Charts, key contact between CAD, Project managers, Cab Shop, machine shop, purchasing.

Specific Duties

  • Develop and Implement project plans using Smart Sheet tracking of jobs through all departments. Communicate to all departments.
  • Clarify detailing specifications with estimators, detailers, Project Managers, architect/Designers. Communicate with all departments
  • Communicate with Project Managers any suggested design and possible variations to required due date
  • Co-ordinate and sign off all quality/specification of all project joinery leaving the Cab Shop
  • Co-ordinate and Schedule job packs, taking into account assembly lead times, labour availability. Communicate and plan working with the machine Shop Schedular
  • Ensure all job packs, dispatch information is correct and communicated to all departments
  • Co-ordinating and Tracking of all out work purchasing as per Smart Sheet and Project Manager briefs. With an understanding of supplier lead-times, material specifications and material lead times.
  • Co-ordinate dispatching dates, tracking information with Cab Shop, Truck deliveries and onsite personnel.  Confirm and communicate
  • Co-ordinate and ensure all programming and machine settings are correct for jobs that are due to hit the floor
  • Develop and implement weekly (or as required) project meetings. Facilitate and lead these meetings to ensure all problem solving decision making and agreed actions are clearly discussed, understood and measured/tracked
  • Present at weekly Sales and Operations Planning meeting (Mondays) status of all projects and Cab shop orders, potential risks and actions to mitigate risks past, current and future jobs coming up.
  • Reporting on reworks, hours Actual vs Budget, project status via smart sheet, month end WIP reporting
  • Machine Shop Scheduling, support and back up to machine Shop Schedular
  • Operation Team involvement in identifying potential problems, problem solving across the operations. An active engaged member who can engage with other Team Leaders to find and implement solutions not only in their department but also across all upstream and downstream departments.

Skills, Experience & Education

  • Detailing, designing, variation process
  • Architect drawing, Shop drawing, detailing specs
  • Supply chain Co-ordination, knowledge and relationship with industry supplies
  • Pricing, estimating, BOM’s
  • Resource utilization, hour tracking
  • Project Management
  • Project management software use
  • PSDM process – Problem solving and decision-making techniques
  • Optimizing, purchasing, scheduling
  • Joinery materials and product knowledge
  • Joinery detailing
  • Cabinet making, installing
  • CNC machines and process
  • Customer services relationship management
  • MRP/ERP systems knowledge
  • People development and performance management
  • Developing and implementing procedure across internal departments

Core Competencies

  • Ability to prioritise workload
  • Analytical Thinking
  • Communication
  • Conflict management and resolution
  • Customer service
  • Financial acumen
  • Innovation
  • Office computing
  • People management and team leadership
  • Problem Solving
  • Strategic thinking
  • Teamwork 
  • Time Management

 Job details:

Type:              Full time permanent position

 

Salary:            $105k pa neg

Location:        East Tamaki, Auckland, NZ

 

CONTACT:

Patricia Mawhinney

Appointments Recruitment Specialists

Email:             info@appts.co.nz

Mobile:           021 500 653

Office:            (09) 478 9954

Free:               0800 030 125 (FREE from ALL NZ phones)

Website:         www.appts.co.nz

Important Additional Requirements to Note:

  1. Your CV must be included & detailed with your current relevant work experience to date.
  2. Please also note your required notice period in your current job (in your Cover Letter).
  3. Note your eligibility to work in NZ.
  4. If you have contacted Appointments Recruitment Specialists before, you are welcome to do
    so once again, and we would be pleased to hear from you.

Beam Saw Operator. Cabinetmaking Joinery factory. Good level of experience needed. Assistance loading machines. East Tamaki. $28/hr neg. Start ASAP.

BEAM SAW OPERATOR

An established cabinetmaking / joinery manufacturing company in East Tamaki requires a very experienced BEAM SAW OPERATOR.

There is support with this role including assistance with loading the machines.

This job is paying well, and the wage rate is negotiable with experience.

Overtime available.

If you have contacted Appointments Recruitment Specialists before, you are welcome to do so once again, and we would be pleased to hear from you.

Eligibility to be able to work in NZ is very important as this position is for an immediate start.

Job details:

Type     Full time permanent position

Wage   $28/hr neg with experience

Based   East Tamaki

Start     ASAP

CONTACT:

Patricia Mawhinney

   Appointments Recruitment Specialists

Free Ph   0800 030 125

(from ALL phones within NZ)

Mobile     021 500 653   or

(09) 478 9954

Email       info@appts.co.nz

Website   www.appts.co.nz

www.facebook.com/appointments

Project Manager Cabinetry / Joinery, Cabinet Vision, CAD, organised, prioritising, problem solving, scheduling, sound communication, onsite & Factory. North Shore. $100k pa Perm ($50/hr) neg.

PROJECT MANAGER – Cabinetry / Joinery / High-end Manufacturing

 An established Cabinetry / Joinery manufacturing company located on the North Shore, require a High-end Cabinetry Project Manager and CAD drawer. This is an opportunity to work with an amazing progressive and elite team working on New Zealand’s most prestigious new builds and renovations working with up to date technology and software. Proven previous experience using Cabinet Vision is critical to this role being familiar and knowledgeable in Cabinet Vision is essential.

This position is critical to projects making sure all goes to plan, as there are a lot of other people involved, you will need to be able to run projects efficiently and sort out any / all issues along the way, with effective communication and good people interfacing abilities, at all levels, to achieve the end result.

KEY ATTRIBUTES:

  • Must have experience with Cabinet Vision software
  • CAD & Cabinet Vision experience, as you will need to draw on the job at times
  • Previous skills being able to work onsite doing measurements etc is required
  • Liaising with Architects, Clients and Builders
  • Communicate effectively, courteously with staff and clients
  • Must be detail and process orientated
  • Follow processes correctly
  • Quality and customer service through communication is key
  • Experience in quoting helpful
  • Think on your feet to make decisions and problem solve
  • Adept at juggling the situation to best advantage for all
  • Willing to learn and grow
  • Have a positive disposition
  • Health and Safety a high priority

 JOB DETAILS:

 Wage              $50/hr ($100k/pa) neg with skills & experience

Bonus:            Health Insurance, mobile phone & access to vehicle during the day included

Location         North Shore, Auckland

Type                 Full time permanent position

Start                ASAP

CONTACT: 

 Patricia Mawhinney 

Appointments Recruitment Specialists

Mobile                         021 500 653   or   (09) 478 9954 

Free Ph                       0800 030 125 (from ALL phones within NZ)

Email                          info@appts.co.nz

www.appts.co.nz     /     www.facebook.com/appointments

Important Additional Requirements to Note:

  1. A brief Cover Letter outlining your current work situation and all experience you have relating to the above position available Job Description is included in cover letter too.
  2. Your CV must be include detail of relevant work history.
  3. Please note the current notice period you required to give, on your cover letter too.
  4. If you have contacted Appointments Recruitment Specialists before, you are welcome to do so once again, and we would be pleased to hear from you.
  5. Eligibility to be able to work in NZ are very important, please note this in CV.
  6. N.B. All successful applicants have to be in New Zealand for personal one on one interviews with the employer, if required.

 

 

 

 

 

Production Supervisor

Established Cabinetmaking / Joinery factory in East Tamaki, Auckland are looking to employ an experienced Production Supervisor to oversee the teams working the CNC, Nesting, Lathe machinery including Homag BHX, Biesse, Weeke, Bass, Edge Banders, Beam Saws, etc.

Main responsibilities are to manage the CNC production and oversee the CNC team.

What you will need:

  • Proven experience supervising teams.
  • Experience in CNC machining and able to lead by example in this area of production.
  • Adherence to health and safety compliance and regulations in a safety critical environment
  • Committed to playing an active role as part of a ‘Zero Harm Culture’
  • Solid understanding of how to be part of an efficient and “well oiled” team, all working toward a common goal.
  • Motivating attitude to encourage teams you manage
  • Ability to report and liaise with management on a day to day basis

What you will get in return:

  • Work with a stable employer who offers a variety of work and truly look after their employees.
  • Working within a rapidly expanding workshop with a team of like-minded people.
  • Your expertise and opinions will be valued and respected.

 

Job details:

Type:              Full time permanent position

Wage:             $40/hr neg with skills & experience

Based:            East Tamaki

Start:               ASAP

 

CONTACT:

Patricia Mawhinney

Appointments Recruitment Specialists

Email:             info@appts.co.nz

Mobile:           021 500 653

Office:            (09) 478 9954

Free:               0800 030 125 (FREE from ALL NZ phones)

https://appts.co.nz/               https://www.facebook.com/appointments/

Important Additional Requirements to Note:

  1. Your CV must be included & detailed with your current relevant work experience to date.
  2. Please also note your required notice period at current job, on your cover letter too.
  3. Note your eligibility to work in NZ, this is very important and a requirement for certain jobs.
  4. If you have contacted Appointments Recruitment Specialists before, you are welcome to do so once again, and we would be pleased to hear from you.

 

roduction CNC machinery Supervisor in Cabinetmaking Joinery factory. Experience essential. $40/hr neg. East Tamaki. PERM Job. Start ASAP.

Team LeaderJoinery Cabinetry, experience essential.

Production Joinery, Cabinetry, Interiors. Tauranga, NZ. Perm job. Wage $40/hr ($85k pa) neg.

TEAM LEADER Joinery & Cabinetmaking

Team Leader position available in Tauranga with a Joinery manufacturing company.

Experience at Team Leader level involving Joinery and Cabinetry essential and experience in Shopfitting and Interiors an advantage.

Established company with strong support levels.

Full Job Description, further benefits and allowances etc. can be provided further.

Solid hand over period available as the person currently employed in the position being promoted so will be available & on hand to do a full, and if necessary, induction process.

Application should be legally currently eligible to work in New Zealand.

 

Remuneration:           $40/hr ($85k pa) neg.

 Location:                    Tauranga, New Zealand

 

CONTACT: 

Patricia Mawhinney

Appointments Recruitment Specialists

Mobile                         021 500 653   or   (09) 478 9954 

Email                          info@appts.co.nz

Website                      www.appts.co.nz

Important Additional Requirements to Note:

  1. A brief Cover Letter outlining your current work situation and all experience you have relating to the above Job Description is included in cover letter too.
  2. Your CV must be include detail of relevant work history.
  3. Please note the current notice period you required to give, on your cover letter too.
  4. If you have contacted Appointments Recruitment Specialists before, you are welcome to do so once again, and we would be pleased to hear from you.

CNC Operator. 2 JOBS. Biesse Rover One using B Solid. Nesting. Edgebander. Experience Essential. Some training. Onehunga. $28/hr neg. Perm JOB ASAP.

CNC Operator Joinery Wood

An established Cabinetmaking manufacturing company in Onehunga area is looking for an experience

CNC Operator. They run both Biesse Rover One using B Solid.

Nesting experience would be an advantage.

The do a variety of work including interiors, kitchens, receptions, work for schools and apartment blocks and residential

The main job objective is working closely with manufacturing team, running, operating and maintaining CNC Machines / Edgebanders accurately cutting / fabricating designs to be dispatched and installed smoothly by an installer.

Key qualities of an ideal candidate:

  • Experienced in operating and maintaining CNC machines
  • Ability to operate CNC Machinery / Edgebanders
  • Operating Edgebander machines including cutting and fabrication
  • Read and work from plans, drawings / blueprints
  • Previous Cabinetmaking / Joinery experience an advantage

Requirements:

  • Skilled CNC Operator with previous hands-on working experience of CNC machinery
  • Able to work unassisted and meet deadlines
  • Maintenance and quality control
  • Produce a high quality of workmanship
  • HIGH attention to detail
  • Energetic and enthusiastic
  • Reliable & punctual every day
  • A natural problem solver, great team-player with a good attitude
  • Be enthusiastic & not afraid of a challenge
  • Clear fluent English must be spoken in order to follow instructions
  • Follow all health & safety practices
  • Eligible to legally work in NZ

Details:

Type:              Full time permanent position

Wage:             $28/hr neg with skills & experience

Based:            Onehugna, Auckland

Start:               ASAP

What You Need to do Now:

Please email your current CV with a covering letter:

Patricia Mawhinney of Appointments Recruitment Specialists

Email:             info@appts.co.nz

Mobile:           021 500 653

Office:            (09) 478 9954

Free:               0800 030 125 (FREE from ALL NZ phones)

https://appts.co.nz/

https://www.facebook.com/appointments/

Important Additional Requirements to Note:

  1. Your CV must be included & detailed with your current relevant work experience to date.
  2. Please also note your required notice period at current job, on your cover letter too.
  3. Note your eligibility to work in NZ, this is very important and a requirement for certain jobs.
  4. If you have contacted Appointments Recruitment Specialists before, you are welcome to do so once again, and we would be pleased to hear from you.

INSTALLER Joinery, Cabinetry, Kitchens, Interiors, Residential, Commercial. Experience essential. North Shore. $35/hr neg. Overtime. Van, Tools. ASAP.

Stylish Cabinetmaking / Joinery Interiors company requires an experienced INSTALLER.

Daily duties include:

  • Installation, assembly, construction or cabinetry knowledge / experience advantageous
  • Able to understand all aspects plans and
  • Able to liaise with production team on installations required
  • Fluent English both verbal and written skills
  • Capable of liaising productively with clients and factory
  • Ability to problem solve, and work out solutions on site for best outcome
  • Driving License required and this needs to be Full Clean Vehicle (Class 1).
  • Eligibility to work in New Zealand for a start ASAP.

 

Job details:

Type              Full time permanent position

Wage              $35/hr neg with experience

                        Overtime with Van / Tools provided

Location         North Shore locations

Start                ASAP

What You Need to do Now:

If this job sounds like “the one” please email your current CV with a covering letter:

Patricia Mawhinney of Appointments Recruitment Specialists

Email:             info@appts.co.nz

Mobile:           021 500 653

Office:            (09) 478 9954

Free:               0800 030 125 (FREE from ALL NZ phones)

Important Additional Requirements to Note:

  1. Your CV must be included & detailed with your current relevant work experience to date.
  2. Please also note your required notice period at current job, on your cover letter
  3. Note your eligibility to work in NZ, this is very important and a requirement for certain jobs.
  4. If you have contacted Appointments Recruitment Specialists before, you are welcome to do so once again, and we would be pleased to hear from you.